Best Mini Itx Pc Case of May 2022: TOP Deal, Best Budget Best Mini Itx Pc Case

Vented Panel: The NR200 is flanked with five ventilated steel panels for unrestricted airflow.

Unrestricted Cooling Potential: Holds up to 7 fans. 5 sides of open ventilation. Fits CPU coolers up to 155mm tall or up to 280mm long radiators.

Full-size GPU Compatible: Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm. Vertical mounting is optional.

360 Degree Accessibility: Every panel and frame part can be dismantled to allow advanced disassembly and 360 degrees of access to work on components.

High-quality Materials: Thick, powder coated SGCC steel lasts the life time of the chassis and resists marring from transport or handling.

Custom Cooling Support: Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful, custom water-cooled builds inside a compact enclosure.

Easy, Tool-free access: All external panels, including the tempered glass and top-mounted fans, are secured with pins for easy removal, facilitating quick access to the internals without the use of tools.

Supports M ATX and Mini ITX Form Factor Motherboards. Motherboards 6.7” x 6.7” (Mini ITX) , 9.6” x 9.6” (Micro ATX)

Designed for use in either a vertical or horizontal orientation on the motherboard

Chamber concept design with optimized cable management space for small form factor builds

Stackable and flexible thermal solution. Remarkable expansion. Advance ventilation

2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 3x 3.5 inches or 2.5 inches

Includes 1x 200 millimeter Front Fan Pre installed, Optional Cooling Available

New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation

REMASTERED DESIGN: The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.

SIMPLE CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.

STREAMLINED COOLING: Two Aer F120mm fans* included for optimal internal airflow and the front panel and PSU intakes include removable filters, removeable bracket designed for radiators up to 240mm.

SPECS: Max GPU Clearance: 265-325mm, Radiaor Support - Front: 280mm or Rear: 120mm

Meshed front panel for increased intake of ambient cool air

Supports Mini-ITX motherboards for small profile builds

Unique HDD/SSD mounting bracket positioning allows more space inside

Supports 120 mm water cooling kit at the front of the case

Supports standard length ATX PSU

Meshed front panel for increased intake of ambient cool air

Supports Mini-ITX motherboards for small profile builds

Unique HDD/SSD mounting bracket positioning allows more space inside

Supports 120 mm water cooling kit at the front of the case thanks to HDD/SSD mounting style

Supports standard ATX PS2 sized power supplies

Compatible with long graphics cards - up to 13.5 inch (343 mm) long

Maximum CPU cooler height of 2.5 inch (65 mm)

Includes one 120 mm fan at the front and one 80 mm fan on the side

【Outstanding Airflow】Large front panel metal mesh and 5pcs 120mm MUSETEX ARGB fans are pre-installed for the case to provide lighting and excellent airflow at the same time,keep cooling with the case.This widest case in all micro cases，the width of this case is 230mm, there is still 38mm distance between GPU and the front glass panel after installing vertical graphics card, which will keep your system cooling.

【Multiple ARGB Modes】 Button control has 19 lighting modes ;Motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only)

【More Space】MUSETEX MK7 series has 4MM Tempered Door Opening Design and Mesh Front Panel,make it easy and free to disassemble and install computer accessories, and allow maximum airflow to provide cooling for your power supply. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；Micro-ATX/ITX motherboard; 120mm/240mm/280mm water cooling; maximum length 340mm GPU（installing vertically or horizontally）; maximum length 180mm CPU air cooling; maximum length 200mm PSU.

【Dust-proof Design】The Matx PC case is equipped with 2pcs dust filter , and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom.

【TOP I/O PANEL】Musetex mid-tower micro-atx PC case designed with 2 x USB 3.0 Port, 2 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that you can transmit data without interference.

Motherboard Compatability: Micro-ATX/ Mini-ITX motherboards（Not for ATX motherboard）

Support standard-length expansion cards (10 5 inches)

Mini-dtx/Mini-ITX motherboard & ATX PSU compatible

Support 120mm or 140mm single fan all-in-one liquid cooler

Support 2 5" And 3 5" Hard drives

Elevated standoff for motherboard back side components

Supports Mini ITX Motherboard

2x USB 3.0, 1x Headphone, 1x Mic Front Ports, Internal Bay: 2x 3.5 inches, 2x 2.5 inches 1 x 200 millimetre fan, 2 x 80 millimetre turbo fans (optional)

Interchangeable Side Panels: Symmetrical panels to build the system with personality

Adjustable I/O Panel Location. Extreme Air/Liquid Cooling Configurations Options and Dual Modular Drive Rack Design

Chambers concept. Advanced ventilation

Great Expansion in Compact Size: Designed with high-end system compatibility, users can easily install up to 4 data storage devices with modular drive racks, a dual xpansion slot VGA with the length up to 260mm and width up to 40.5mm, a tower CPU cooler with height up to 140 millimeter, and a high wattage PSU with a length up to 180mm.

Great expansion in compact size

Improved features: Mk III cases come with a new ultra smooth surface treatment, redesigned blade and grill, and our new COBALT TWINAX PCI-e RC260 GEN 4+ riser cable.

Milled from solid blocks of aluminum, and with a glass blasted anodized aluminum exterior, the Ghost S1 offers a level of quality rarely seen or felt in any computer case.

Designed from the inside out: The stand-alone spine design gives unparalleled rigidity, flexibility and accessibility.

A fast and convenient build experience: Build directly on the spine with open component access from every angle.

Airflow in focus: Cooling air is pulled in by each heat generating component and directed upwards through the top.